I-Clad System
A brick faced internal wall system developed specifically for interior applications, for fixing to battens or timber/light gauge steel stud walling systems.
System Benefits
Slim Profile
- Suitable for commercial and domestic interiors.
- Versatile, lightweight system, quick and simple to install.
- Slim profile minimises loss of valuable interior space.
Real Brick
- Achieve the look and feel of traditional masonry.
- Real kiln fired brick slips in a range of colours and textures.
- Can accommodate any metric sized brick slip.
- Specially formulated cement based pointing mortar available in eight colours.
Trusted
- Designed by Eurobrick, leading industry specialists with over 30 years experience.
- Extensively tried and tested.
System Information
- I-Clad panel comprises a 12mm thick plasterboard board laminated with Eurobrick's ribbed profile skin. Overall panel depth 12.5mm.
- Installed system weight from 40Kg/m² and system depth from 28mm (including 15mm thick Britannia range brick slip).
- For small internal applications, particularly around fireplaces, cement based adhesive and brick slip spacers can be supplied as an economic alternative fixing method to using the panel systems.
- Euro Classification of Reaction to Fire
EN 13501-1: 2018; Class B- s1, d0.
Installation
The plasterboard backer panel can be fixed to timber or light gauge steel studs or existing plywood or plasterboard surfaces.
Where I-Clad is fixed direct to battens on framing systems, these must be correctly positioned to meet the system’s fixing requirements. Please refer to the Installation Instructions and the fixings layout diagram in the Technical Drawings, both linked below.