0.55mm thick vacuum formed polystyrene high impact (HIPS) waterproof skin creating horizontal brick tracks bonded to Knauf Insulation Polyfoam ECO Laminating Board, nominal size 1.20m x 2.40m x 17mm, 50-100mm thick.
0.55mm thick vacuum formed polystyrene waterproof skin creating horizontal brick tracks bonded to VIROC Cement Bonded Particle Board, nominal size 1.20m x 2.40m x 10mm thick.
0.55mm thick vacuum formed polystyrene waterproof skin creating horizontal brick tracks bonded to Knauf Gypsum Plasterboard, nominal size 1.20m x 2.40m x 12.5mm thick.
EPS 100 expanded polystyrene manufactured and profiled creating horizontal brick tracks, nominal size 1.20m x 1.20m x 20mm in various thicknesses from 20-100mm thick.
Specially manufactured for Eurobrick, Nylon 66 plastic washers 45mm diameter with various self-tapping dry wall screw types to suit timber or metal substrates (for X-Clad, I-Clad and & V-Clad panels).
Specially manufactured for Eurobrick, Grilon BGF50 glass filled nylon masonry/concrete fasteners 45mm diameter made to various lengths to suit panel thicknesses (for X-Clad, I-Clad and V-Clad panels). Other varieties of anchors are available depending on type of substrate.
35mm diameter stainless steel washers and self-tapping dry wall screws in various lengths (for P-Clad panels).
Panel Jointing Tape
EG cloth adhesive waterproof tape 48mmx25m long. One roll will joint about 6 standard panels.
Brick Slips – Britannia Range
Extruded kiln fired clay brick slips F2 grade of resistance, stretcher slips nominal size 215mm x 65mm x 15mm thick. Pistol corners nominal size 215mm x 65mm x 100mm x 15mm thick. Manufacturer’s tolerance +/- 6mm for length and +/-2mm for height. Pistol corners +/-1.5% from 90 degrees.
Brick Slips – Classic Range
Specially cut slips from kiln fired bricks F2 grade of frost resistance. Stretcher slips nominal size 215mm x 65mm x 20-25mm thick. Pistol corners nominal size 215mm x 65mm x 102.5mm x 20-25mm thick. Manufacturers size tolerances T1/R1.
Stone Slips – Bradstone
Bradstone manufacture a range of colours and sizes of stone slips and pistol corners for Eurobrick. Sizes vary from 215mm x 65mm x 20mm thick to 450mm x 215mm x 20mm with variations in size in between. Thickness of stone slips varies with type and across up to 35mm thick.
600ml sachets of one part moisture curing polyurethane adhesive.
600ml sachets of single part, high grab maximum strength MS polymer moisture curing adhesive.
Europoint is a Eurobrick formulated, specially manufactured, pointing mortar designed specifically for brick slip installation available in dry-pack format in 25kg bags. Currently there are eight standard colours available from stock with other colours being available to order subject to quantity required.
Aluminium L section base trim for protecting the underside of X-Clad, V-Clad and P-Clad systems. Trim size for 17mm X-Clad 60mm x 30mm x 1mm thick in 2.5m lengths and varies in section size subject to panel thickness.
Expansion Joint Rod
20mm diameter polyethylene backer rod for filling between panels (minimum 15mm gap) where expansion joints are required in the installation.
If you would like to see more information on how our system works, please download a copy of our installation guide or give us a call on .